High-speed stranding machine
directory
Stranding machine name
Stranding machine USES
Technical characteristics
Technical parameters
300-630 type basic parameters
Stranding machine name
Stranding machine and a high speed wire twisting machine/beam silk machine/soft wire machine,
Stranding machine USES
Are widely used in all kinds of soft/hard conductor line (copper wire, wire, tin wire, copper clad steel, copper clad aluminum, etc.) and electronic line twisted, such as: the power cord, telephone lines, audio line, video line, auto line, network line, etc. Make more root single conductor twisted into a stock to wire process requirement.
Technical characteristics
The technical features Technique Feature 】 :
1. The highest spindle speed for 3000 RPM.
Stranding machine
2. Automatic tension control: stranded wire, the line from the receipt of the spring form tin move the line tension should be continuously increasing, and the function of automatic tracking control take-up tension; Make the whole plate take-up tension uniform, and at the same time, the machine can not stop control tension.
3. Host for oil lubrication, the natural circulation cooling, prolong the service life of main shaft bearing.
A line system adopts the new structure, conductor from the spindle roller direct line to bow wear, minus the aluminum plate on the corner of the wheel failure and cause scratches and jump shares phenomenon.
4. Machine has three word press device, ensure the stranded conductor the roundness of the insulation material, reduce the loss.
5. The machine using synchronous belt transmission, built-in no lubrication points, keep clean, stranding machines without pollution, adapt to all kinds of surface cleanliness requirements higher line of conductors twisted.
6. Adjust lay only need to change a lead take wheel, adjust the ground to just open reversing lever, simple in operation, so as to reduce the operating ShiWuLv and working intensity. • the bearing adopts Japanese famous brand, bow with the new material production, soft good running at high speed, avoid the vibration cause jump strands, frequency converter, PLC, magnetic powder clutch, electromagnetic brake, hydraulic jack, etc are imported famous brand, reduce the failure rate and maintenance costs.
Technical parameters
The technical parameter Technique specifications 】 :
Specification HML - 500 p or HML - 400 p (general)
Purpose to adapt to the bare stranded wire, tin wire, copper clad aluminum, enameled wire, alloy wire and twisted.
Rotating speed of 3000 r/min
To wire diameter φ 0.08 - phi 0.45 mm
Twisted sectional area of 0.035-2.0 mm
Lay 5.68 ~ 57.00 mm and section
Winding shaft 500 mm x 320 mm × 56 mm (according to your drawings production), USES the manual pump hydraulic lift
Drive motor 5.5 HP motor and frequency converter
Protest area of 2560 * 1350 * 1400
Hank to S/Z reversing can choose any, adjust the ground to only use hand pull row line device in reversing lever can, simple operation
Row line bearing type line line, row radial, the row spacing are adjustable
Brake using electromagnetic brake, internal and external bolt, the rice automatically brake
Tension control magnetic powder clutch control take-up tension, by PLC programmable device automatic adjust tension with ensemble, constant tension
300-630 type basic parameters
Type HML - 300 type high speed wire twisting machine HML - 500 type high speed wire twisting machine HML - 630 type high speed wire twisting machine
Machine speed selection (RPM) 3000 RPM - 4000 RPM 2200 RPM - 3000 RPM 1600 RPM - 2000 RPM
To wire diameter (mm) Φ 0.06 - Φ 0.28 Φ 0.08 - Φ 0.65 Φ 0.08 - Φ 1.0
Twisted off area (mm ²) 0.03 0.937 0.035 2.0 0.183 6.7
Lay (mm) 4.33 17.21 5.68 - and 8.0 97.77
The coil diameter (mm) Φ 300 Φ 500 Φ 630
Host power 2.2 KW 4 KW 5.5 KW